Lasers in Contemporary Implant Dentistry - Part 1

LOD-237-00

Dr. Glenn van As

Part 1 of 2: Lasers in Contemporary Implant Dentistry by Dr. Glenn van As<br /><br />Part 1 (LOD 237-00) of this two part series will look at four things that can happen with laser tissue interactions: Scatter, Transmission (or Refraction), Absorption, and Reflection. This will help us understand the physics and science of lasers. We will look at the several different wavelengths available for implant dentistry, and which one might be appropriate for your practice. This lecture will present a protocol that will help you determine where lasers can fit in to implant dentistry. And, finally, we will discuss how lasers can impact before you place your implant, and during the placement of your implant.<br /><br />Part 2 (LOD 238-00 - sold separately) of this two part series will discuss the role of lasers after the implant has been placed. We will demonstrate how it can be used to improve healing. It can be used during uncovery. It can be used in periimplant tissue removal, and even in the exciting world of periimplantitis. Clinical cases will be presented showing hard-tissue lasers being used for decortication as an alternative to traditional means. We will focus on why an electrosurge may be damaging to your implants, and may cause you more problems than benefits, and why a diode-laser may be your treatment of choice. This lecture will conclude with what may be the future of lasers, and how Erbium lasers might be able to be used in periimplantitis to not only remove biofilms and surfaces like TiUnite, but to actively allow for reosseointegration to occur.

CAD/CAM Fabricated Complete Dentures: From Concept to Reality

LOD-214-00

Dr. Charles Goodacre

This presentation will show the procedures used to record the clinical information needed for the fabrication of conventional complete dentures using CAD/CAM technology as well as the fabrication process itself.<BR><BR>Recently, the technology has been applied to implant overdentures and fixed complete arch provisional prostheses used in conjunction with the immediate loading of dental implants and these procedures are shown.

Excellence in Dental Aesthetics: New Trends and Materials in Aesthetic Implantology

LOD-212-00

Luc Rutten MDT

Clinicians and dental technicians have access to an astounding array of new technologies, tools and materials to design predictable beautiful smiles.<BR><BR>This presentation puts an emphasis on a close co-operation between prosthodontist, periodontist, implantologist and dental technician. In addition, a focus is placed on different surgical, clinical and prosthetic techniques to achieve successful aesthetics.<BR><BR>Material selection is fundamental in management of complex rehabilitation and on implants. The aesthetic outcome and the natural appearance of the restoration depends on the skills of the dental technician. Understanding of the gingiva of the dental technician will be explained to re-create in a two-way communication an aesthetic end result. New concepts and trends with focus on zirconium dioxide and its excellent long-term behaviour and extraordinary mechanical properties, will be discussed to realize predictable natural oral aesthetics around implants.

Risks Endangering Bone Stability Around an Implant

LOD-208-00

Dr. Georg-H. Nentwig

The risks that endanger bone stability around an implant can be related to trauma, loading, anatomy, implant, reconstruction, or the patient. This lecture will provide hints and scientific background about each one of these aspects so that you can manage and even avoid these risks.<BR><BR>Bone stability is the key for long-term success of an implant. But, there are two areas that must be identified in maintaining this stability. We will emphasize the importance of the implant abutment area where the bone is adjacent to the soft tissue. This bone is critical for supporting the soft tissue and for ensuring the health of the soft tissue and avoiding bacterial contamination.<BR><BR>This lecture will show you what you can do to improve a weak bone to avoid an early functional mistake or failure of the total reconstruction. We figured out that we can add, after the static phase, after the second stage surgery, after the load has started, a bone training phase that can improve the original weak structures so much that you can rely on it's stability even if you apply a more risky restoration.<BR><BR>We will discuss how to avoid esthetic failues, an unpleasent situation for both the patient and the dentist, that are often due to lack of bone right from the beginning.<BR><BR>Finally we will discuss the option to place an implant in a sub-crestal position which is only possible if you use an implant that has a stable cone connection. The cone connection will avoid any bacterial release, and will therefore avoide any bone loss in the cervical region caused by this bacteria contamination. With this concept we can achieve long lasting esthetic results.

The Biodynamics of Osseointegration Facts and Clinical Implications

LOD-207-00

Dr. Peter Schupbach

Dental implants are placed into the alveolar bone, with the expectation that they become osseointegrated and that the periimplant mucosa will heal to the abutment surface and fulfill the primary functions of the periodontal tissues, which are attachment and protection of the soft tissue and the underlying bone.<BR><BR>This requires that the rather rigid ankylotic like connection between implant and bone replaces functionally the sophisticated suspension via the periodontal ligament as offered by the evolution and, that the structural framework of the periimplant mucosa matches the architecture of the gingiva. <BR><BR>The context of an understanding of the elicited host site interfacial healing response will be reiterated for the time period immediately following implant placement up to long term behavior. The role of the implants

Implant placement in fresh extraction sockets. Key decision factors

LOD-193-00

Prof. Mariano Sanz

It is well established that tooth extraction will result in an apico-coronal as well as bucco-lingual reduction of the alveolar ridge, mostly in the buccal aspects of the extraction site.<BR><BR>In order to avoid this physiological bone loss some clinicians have advocated the immediate installation of implants in fresh extraction sockets. Different clinical studies have evaluated the impact of this implant placement surgical approach on different outcomes, such as: implant survival, bone crest alterations and aesthetic results.<BR><BR>However, in spite of these reports, there is a lack of well-designed clinical trials that have evaluated these outcomes systematically and there is a lack of knowledge on the possible factors associated with different hard and soft tissue outcomes of this surgical protocol.<BR><BR>This presentation will review the results from clinical trials evaluating the immediate implant placement approach and we hall review the important risk factors (implant design, implant position, implant location, thickness of bony walls, etc.) involved in the clinical outcome.<BR><BR>Finally we shall provide some clinical recommendations on the use of this surgical approach.

Predictable and Successful Maxillary Sinus Augmentation

LOD-192-00

Dr. Toshiro Sugai

In this presentation, we will identify safer and more predictable maxillary sinus augmentation procedures. We will discuss how to utilize CT imaging to evaluate and interpret the 3D anatomy of the sinus, including ostium, superior alveolar artery, and septa. Dr. Sugai will describe how to predictably lift the sinus membrane and avoid complications.

Predictable Soft Tissue Grafting for Esthetics in Thin Periodontium

LOD-191-00

Dr. Paul Lin

This presentation will discuss the thin periodontium and how to utilize this to achieve predictable soft tissue grafting for esthetics.<br /><br />Soft tissue grafting by root coverage and augmentation can improve the facial esthetics not just for natural teeth, but also for implants.<br /><br />By utilizing the same concept of placing the soft tissue on the thin periodontium we can help augment the tissue around implants and dentures and improve and enhance the facial esthetics.<br /><br />Animations will illustrate this concept and provide insight as to how we take the soft tissue away from the pallate and harvest it in an elegant, more predictable fashion.<br /><br />This will also show how to secure the covering flap so the patient will not experience any pain after the surgery.<br /><br />This presentation is intended to increase your understanding, comfort and confidence in performing soft tissue grafting in a more predictable way.

The All on 4 Concept - Diagnosis to Delivery - 4 Lecture Set (Parts 1 - 4)

LOD-190-00

Dr. Saj Jivraj

<br><strong>PART 1: Diagnosis and Treatment Planning, Concepts of Immediate Loading</strong><BR><br>A. Clinical and radiographic evaluation of the patient<BR>B. Specific clinical factors which determine the sucess of treatment<br>C. Restorative space requirements<br>D. Principles of immediate loading (Science and Techniques)<hr><strong>PART 2: Principles of Graftless solutions and surgical Protocols</strong><BR><BR>A. What is All on 4?<BR>B. Principles of All on 4, armamentarium needed<br>C. Surgical protocols - flap design, implant placement, radiographic evaluation<BR>D. What the surgeon must know prior to placing implants<br>E. Communication between the restorative dentist and surgeon<hr><strong>PART 3: Clinical Patient Presentations<BR>Surgical and Prosthetic Protocols for Fabrication of a Full Arch Immediate Load Prosthesis</strong><BR><BR>A. Clinical treatment presentation of a dentate patient. Diagnosis, treatment planning and fabrication of the immediate load prosthesis<BR>B. Clinical treatment presentation of an edentulous patient. Diagnosis, treatment planning and fabrication of the immediate load prosthesis<hr><strong>Section 4 - Prosthetic principles and techniques for fabrication of the final prosthesis<BR>Complications and maintenance.</strong><BR><BR>A. Fabrication of the final prosthesis from Impressions to delivery<BR>B. CADCAM design of the titanium bar and laboratory procedures involved in fabrication of the final prosthesis<br>C. Commmon complications and how to address them<BR>D. Maintenance

Guidelines for Aesthetic Peri-Implant Gingival Tissue (JAPANESE LANGUAGE ONLY)

LOD-178-00j

Dr. Toyohiko Hidaka

Guidelines for Aesthetic Peri-Implant Gingival Tissue (JAPANESE LANGUAGE ONLY)