Otimizando Cor e Forma em Restauracoes Esteticas - Dentes Anteriores (PORTUGUESE LANGUAGE ONLY)

LOD-095-00p

Dr. Edson Araujo

O tema abordado nesta apresentacao sera restauracoes diretas em dentes anteriores com resina composta. Dentro deste assunto serao abordados, principalmente, dois elementos fundamentais na estetica restauradora: cor e forma. Esses aspectos serao enfatizados com uma visao clinica, de forma detalhada (passo a passo) com objetivo de demonstrar aos estudantes e profissionais como superar clinicamente estes dificeis obstaculos dentro da dentistica restauradora.

The Success of Endodontic Therapy - Healing and Function

LOD-089-00

Dr. Shimon Friedman

The Success of Endodontic Therapy - Healing and Function<br>Over 30% of root-filled teeth in the population present with persistent disease, suggesting an extensive need to manage the affected teeth. Treatment options include extraction and replacement, orthograde retreatment and apical surgery, and selection between these can often be complex. When the patient is motivated to retain the affected tooth, a key consideration is the prognosis, or potential for healing; therefore, the prognosis should be communicated to patients in a clear and objective manner. This lecture focuses on the prognosis of orthograde retreatment and apical surgery.<br><br>Inconsistent reports on the prognosis of orthograde retreatment and apical surgery, in contrast with consistently favourable reports for implant-supported single-tooth replacement, have caused considerable confusion in the profession. To reliably reflect the prognosis, studies must conform to design and methodology criteria consistent with an acceptable level of evidence. These criteria are met by only a few studies on retreatment and apical surgery. This lecture identifies the studies that provide the best evidence and outlines the prognosis of retreatment and apical surgery in regards to healing and symptom-free function of the treated teeth. Furthermore, specific clinical factors are highlighted that may influence the prognosis.

One appointment Inlays/Onlays; Durable, Economical, and Appreciated

LOD-087-00

Dr. Lorin F. Berland

Patients are demanding aesthetic, yet reliable alternatives to the replacement of their defective amalgam restorations. Learn the rationale for replacing defective amalgam restorations while conserving and reinforcing the remaining tooth structure. Systematic methods will be detailed about amalgam and caries removal, insulation, proper preparation, impression taking, inlay/onlay fabrication, and final cementation techniques.

Composite Resins in Contemporary Practice

LOD-086-00

Dr. Ronald Jackson

The public today want their dentistry less invasive and more aesthetic. Direct composite resin does both and its use in dentistry is rising rapidly. However, these materials have undergone significant evolution in recent years and dentists are challenged to keep current. In addition, esthetic standards have been raised and quality outcomes redefined by todays educated patient. This presentation will focus on understanding the new composite materials specifically developed for anterior and posterior use and illustrate the key elements for their successful application.

Endodontic Rotary Instrumentation - How to achieve maximum efficiency while eliminating failure

LOD-085-00

Dr. John T. McSpadden

There may be more instrumentation technique recommendations than there are endodontic instruments available. Obviously, all cannot be the 'best' approach. Are these techniques confusing motion with accomplishment and time with safety? This presentation describes 6 basic principles that enable the practitioner to maximize endodontic rotary instrumentation in terms of effectiveness, efficiency and safety for any type endodontic file available today and as they become available in the future. Saving valuable time and eliminating pernicious stress are the result.

Porcelain Laminate Veneers - Predictable Tooth Preparation for Complex Cases (TURKISH LANGUAGE ONLY)

LOD-084-00

Dr. Galip Gurel

Porcelain Laminate Veneers - Predictable Tooth Preparation for Complex Cases (TURKISH LANGUAGE ONLY)

Aesthetic Challenges with All-Ceramic Restorations (ITALIAN LANGUAGE ONLY)

LOD-083-00

Dr. Mauro Fradeani

Aesthetic Challenges with All-Ceramic Restorations (ITALIAN LANGUAGE ONLY)

The use of MTA in Clinical and Surgical Endodontics

LOD-082-00

Dr. Arnaldo Castellucci

Recently, Dr. Mahmoud Torabinejad of Loma Linda University, California, has developed a new cement named Mineral Trioxide Aggregate which appears to have all of the characteristics requested of the ideal cement to seal pathways of communications between the pulp and the oral cavity (mechanical and carious pulp exposures), and between the root canal system and the periodontium (iatrogenic perforations, open apices, resorbed apices, root-end preparations).<br><br>MTA is an endodontic cement that is extremely biocompatible, capable of stimulating healing and osteogenesis, and is hydrophilic. MTA is a powder that consists of fine trioxides (Tricalcium oxide, Silicate oxide, Bismute oxide) and other hydrophilic particles (Tricalcium silicate, Tricalcium aluminate, responsible for the chemical and physical properties of this aggregate), which set in the presence of moisture. Hydration of the powder results in formation of a colloidal gel with a pH of 12.5, that solidifies to a hard solid structure in approximately three-four hours. This cement is different from other materials currently in use because of its biocompatibility, antibacterial properties, marginal adaptation and sealing properties, and its hydrophilic nature.<br><br>The characteristic that distinguishes MTA from other materials used to date in endodontics is its hydrophilic properties. Materials used to repair perforations, to seal the retro-preparation in surgical endodontics, to close open apices, or to protect the pulp in direct pulp capping, are inevitably in contact with blood and other tissue fluids. Moisture may be an important factor due to its potential effects on the physical properties and sealing ability of the restorative materials. As shown by Torabinejad et al., MTA is the only material that is not affected by moisture or blood contamination: the presence or absence or blood seems not to affect the sealing ability of the mineral trioxide aggregate.<br><br>During the presentation, several cases of treatment with MTA will be showed. Aim of the presentation is to show the indications and the technique for the correct use of this relatively new material: how to seal an open apex, how to repair a strip-perforation under the microscope, how to protect a pulp exposure to perform a direct pulp capping, how to use MTA during surgery to seal the retroprep.<br><br>In conclusion, the viewers should be able to appreciate the advantages of this material, which made our treatments more predictable and gave us the possibility to save teeth otherwise condemned to extraction.

Integrating 'Esthetic' Dentistry and Prosthodontics

LOD-068-00

Dr. Kenneth A. Malament

Dentistry that is esthetic to the patient is an important clinical objective. The knowledge within dental technology, dental science and dental practice has dramatically expanded leading to better quality; artistry and more standards based clinical applications. Ceramics are the most consistently predictable esthetic dental material. Today dentists can offer more treatment options for patients complex problems. Metal-ceramics continue to be the state of the art and profoundly affect prosthodontic care and the future. <br><br>Understanding methods to manage simple and complex restorative issues are critical to improving patient acceptance and even long term ceramic success. Methods to integrate the efforts of laboratory technologists and managing occlusion and patients desires can have a profound impact in the practice of dentistry.<br><br>All-ceramic materials were developed to improve ceramic color and marginal fit. Until recently few research reports attempted to study their long term use or factors that relate to their performance without modeling the data. All-ceramic crowns on molars have yet to reach their full potential. Despite substantial improvements in material strength and toughness, they still fail at relatively high rates. Ultimately crown performance is a complex set of interactions between crown material and geometry, the characteristics of the support structure of the cement and crown, and the clinical loading history.<br><br>This presentation will provide a comprehensive look at failure modes and effects in bilayer all-ceramic crown-cement-tooth systems, tying together the influences on resistance to fracture initiation and propagation of ceramic material properties and thickness; crown/tooth geometry; cement modulus and layer thickness; damage induced by shaping, fabrication, clinical adjustments, and sandblasting; and fatigue in the wet intraoral environment. Some counter-intuitive findings will be addressed including changes in fracture behavior with different geometry and the influence of the compliant cement layer beneath stiff cores. Original research will be presented that studied the clinical behavior of over three thousand all-ceramic restorations. Life history and fracture rates were studied over twenty years in relationship to factors that might affect success. Factors such as tooth position, preparation, luting procedures and gender are significant to long term ceramic success.<br><br>Dental implants have become an integral part of dental practice today. Maintaining predictability and high success rates impose great challenges to the dental team. Edentulous ridge defects constitute a major problem. In the past long teeth have been placed into defects to take up vertical space. Gingival and tooth symmetry and the esthetic results were often compromised. Today these conditions as well as the lack of bone can be augmented surgically with soft and hard tissue grafting. This may not always produce a long-term predictable result. Prosthetic techniques will be discussed utilizing newly developed ceramic gingival material and design for fixed prosthodontics.

Minimally Invasive Soft Tissue Augmentation

LOD-067-00

Dr. Homa H. Zadeh

A variety of techniques have been described for augmentation of soft tissue around teeth with varying donor material and access. Recently, tunnel technique has been used for minimally invasive assess to sites being augmented. This presentation will describe a novel access for soft tissue augmentation and root coverage. Moreover, application of autogenous tissue, as well as growth factors will be discussed. Minimally invasive soft tissue augmentation may also be applied for modification of thin biotypes around dental implants. The techniques described will be illustrated with clinical cases.