Lasers in Contemporary Implant Dentistry - Part 2
LOD-238-00
Dr. Glenn van As
Part 2 of 2: Lasers in Contemporary Implant Dentistry by Dr. Glenn van As<br /><br />Part 1 (LOD 237-00) of this two part series will look at four things that can happen with laser tissue interactions: Scatter, Transmission (or Refraction), Absorption, and Reflection. This will help us understand the physics and science of lasers. We will look at the several different wavelengths available for implant dentistry, and which one might be appropriate for your practice. This lecture will present a protocol that will help you determine where lasers can fit in to implant dentistry. And, finally, we will discuss how lasers can impact before you place your implant, and during the placement of your implant.<br /><br />Part 2 (LOD 238-00) of this two part series will discuss the role of lasers after the implant has been placed. We will demonstrate how it can be used to improve healing. It can be used during uncovery. It can be used in periimplant tissue removal, and even in the exciting world of periimplantitis. Clinical cases will be presented showing hard-tissue lasers being used for decortication as an alternative to traditional means. We will focus on why an electrosurge may be damaging to your implants, and may cause you more problems than benefits, and why a diode-laser may be your treatment of choice. This lecture will conclude with what may be the future of lasers, and how Erbium lasers might be able to be used in periimplantitis to not only remove biofilms and surfaces like TiUnite, but to actively allow for reosseointegration to occur.
Lasers in Contemporary Implant Dentistry - Part 1
LOD-237-00
Dr. Glenn van As
Part 1 of 2: Lasers in Contemporary Implant Dentistry by Dr. Glenn van As<br /><br />Part 1 (LOD 237-00) of this two part series will look at four things that can happen with laser tissue interactions: Scatter, Transmission (or Refraction), Absorption, and Reflection. This will help us understand the physics and science of lasers. We will look at the several different wavelengths available for implant dentistry, and which one might be appropriate for your practice. This lecture will present a protocol that will help you determine where lasers can fit in to implant dentistry. And, finally, we will discuss how lasers can impact before you place your implant, and during the placement of your implant.<br /><br />Part 2 (LOD 238-00 - sold separately) of this two part series will discuss the role of lasers after the implant has been placed. We will demonstrate how it can be used to improve healing. It can be used during uncovery. It can be used in periimplant tissue removal, and even in the exciting world of periimplantitis. Clinical cases will be presented showing hard-tissue lasers being used for decortication as an alternative to traditional means. We will focus on why an electrosurge may be damaging to your implants, and may cause you more problems than benefits, and why a diode-laser may be your treatment of choice. This lecture will conclude with what may be the future of lasers, and how Erbium lasers might be able to be used in periimplantitis to not only remove biofilms and surfaces like TiUnite, but to actively allow for reosseointegration to occur.
Excellence in Dental Aesthetics: New Trends and Materials in Aesthetic Implantology
LOD-212-00
Luc Rutten MDT
Clinicians and dental technicians have access to an astounding array of new technologies, tools and materials to design predictable beautiful smiles.<BR><BR>This presentation puts an emphasis on a close co-operation between prosthodontist, periodontist, implantologist and dental technician. In addition, a focus is placed on different surgical, clinical and prosthetic techniques to achieve successful aesthetics.<BR><BR>Material selection is fundamental in management of complex rehabilitation and on implants. The aesthetic outcome and the natural appearance of the restoration depends on the skills of the dental technician. Understanding of the gingiva of the dental technician will be explained to re-create in a two-way communication an aesthetic end result. New concepts and trends with focus on zirconium dioxide and its excellent long-term behaviour and extraordinary mechanical properties, will be discussed to realize predictable natural oral aesthetics around implants.
Risks Endangering Bone Stability Around an Implant
LOD-208-00
Dr. Georg-H. Nentwig
The risks that endanger bone stability around an implant can be related to trauma, loading, anatomy, implant, reconstruction, or the patient. This lecture will provide hints and scientific background about each one of these aspects so that you can manage and even avoid these risks.<BR><BR>Bone stability is the key for long-term success of an implant. But, there are two areas that must be identified in maintaining this stability. We will emphasize the importance of the implant abutment area where the bone is adjacent to the soft tissue. This bone is critical for supporting the soft tissue and for ensuring the health of the soft tissue and avoiding bacterial contamination.<BR><BR>This lecture will show you what you can do to improve a weak bone to avoid an early functional mistake or failure of the total reconstruction. We figured out that we can add, after the static phase, after the second stage surgery, after the load has started, a bone training phase that can improve the original weak structures so much that you can rely on it's stability even if you apply a more risky restoration.<BR><BR>We will discuss how to avoid esthetic failues, an unpleasent situation for both the patient and the dentist, that are often due to lack of bone right from the beginning.<BR><BR>Finally we will discuss the option to place an implant in a sub-crestal position which is only possible if you use an implant that has a stable cone connection. The cone connection will avoid any bacterial release, and will therefore avoide any bone loss in the cervical region caused by this bacteria contamination. With this concept we can achieve long lasting esthetic results.
Predictable and Successful Maxillary Sinus Augmentation
LOD-192-00
Dr. Toshiro Sugai
In this presentation, we will identify safer and more predictable maxillary sinus augmentation procedures. We will discuss how to utilize CT imaging to evaluate and interpret the 3D anatomy of the sinus, including ostium, superior alveolar artery, and septa. Dr. Sugai will describe how to predictably lift the sinus membrane and avoid complications.
Guidelines for Aesthetic Peri-Implant Gingival Tissue (JAPANESE LANGUAGE ONLY)
LOD-178-00j
Dr. Toyohiko Hidaka
Guidelines for Aesthetic Peri-Implant Gingival Tissue (JAPANESE LANGUAGE ONLY)
Newest Dental Laboratory Techniques in Implant Esthetics
LOD-168-00
Dr. Renzo Casellini
<span id="ctl00_ContentPlaceHolder1_gvProdutos_ctl458_labelConteudoHtml"> <p style="margin: 0px; text-align: justify;">This lecture will present tissue management for anterior cases, the newest techniques in implant esthetics from single crowns to full mouth restorations on zirconia to PFM metal ceramic restorations or acrylic composite restorations. It will examine the difference between PFM metal restorations and zirconia fixed, cemented, or screw-retained.</p> <p style="margin: 0px; text-align: justify;"><br /> </p> <p style="margin: 0px; text-align: justify;">This lecture will discuss the key elements of a Team Approach between the surgeon, the periodontist, the dentist, and the certified dental technologist so that success is achieved.</p> <p style="margin: 0px; text-align: justify;"><br /> </p> <p style="margin: 0px; text-align: justify;">You will learn about the 3D Pre-Planning with CAD/CAM on SIM-Plant that can help you determine exactly what kind of abutments will be best for the patient.</p> <p style="margin: 0px; text-align: justify;"><br /> </p> <p style="margin: 0px; text-align: justify;">And, finally, it will take you, step-by-step, through a case that begins as a disaster. Everything has to be extracted: Upper and lower. Multiple implants are placed. It is restored with full zirconia, and ends up an esthetic and functional success.</p></span>
Gingiva Colored Ceramics in Esthetic Dentistry
LOD-125-00
Dr. Harel Simon
Healthy appearance of the supporting tissue and its architecture are key components for achieving an esthetic dental restoration. It is therefore essential that the gingival tissue surrounding a restoration would be similar to that of the healthy adjacent teeth to create the illusion of natural dentition. Since the majority of patients tend to display a portion of their gingivae in a normal smile, lack of adequate gingival architecture and proper edentulous ridge contour in the horizontal and vertical dimensions may result in compromised esthetics and will, therefore, require further intervention.<br>The use of gingiva-colored ceramics has been suggested to address the esthetic needs in such patients. The purpose of this presentation is to discuss the importance of proper gingival architecture and demonstrate the use of gingiva-colored ceramics in esthetic implant dentistry.
LOD-120-00
Michel Magne MDT
The knowledge about natural oral esthetics and the interactive relationship between patient-clinician-technician constitute the basic strategies for successful esthetic rehabilitations. No matter how powerful technology becomes in today
LOD-111-02
Dr. Edward A. McLaren
This lecture focuses on materials, and combination cases: how to deal with a veneer and a crown, whether the crown is on a natural tooth or an implant. But first, an introduction on digital dental photography: what camera to use for what situation, and tips and tricks for optimal results.